The Ecere SDK - sdk/blob - deps/libffi-3.0.11/i686-pc-mingw32/man/Makefile

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # man/Makefile.  Generated from Makefile.in by configure.
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16
  17 VPATH = ../../man
  18 pkgdatadir = $(datadir)/libffi
  19 pkgincludedir = $(includedir)/libffi
  20 pkglibdir = $(libdir)/libffi
  21 pkglibexecdir = $(libexecdir)/libffi
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 build_triplet = i686-pc-mingw32
  35 host_triplet = i686-pc-mingw32
  36 target_triplet = i686-pc-mingw32
  37 subdir = man
  38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps = $(top_srcdir)/m4/asmcfi.m4 \
  41         $(top_srcdir)/m4/ax_cc_maxopt.m4 \
  42         $(top_srcdir)/m4/ax_cflags_warn_all.m4 \
  43         $(top_srcdir)/m4/ax_compiler_vendor.m4 \
  44         $(top_srcdir)/m4/ax_configure_args.m4 \
  45         $(top_srcdir)/m4/ax_enable_builddir.m4 \
  46         $(top_srcdir)/m4/ax_gcc_archflag.m4 \
  47         $(top_srcdir)/m4/ax_gcc_x86_cpuid.m4 \
  48         $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
  49         $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
  50         $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/acinclude.m4 \
  51         $(top_srcdir)/configure.ac
  52 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  53         $(ACLOCAL_M4)
  54 mkinstalldirs = $(install_sh) -d
  55 CONFIG_HEADER = $(top_builddir)/fficonfig.h
  56 CONFIG_CLEAN_FILES =
  57 CONFIG_CLEAN_VPATH_FILES =
  58 SOURCES =
  59 DIST_SOURCES =
  60 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  61 am__vpath_adj = case $$p in \
  62     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  63     *) f=$$p;; \
  64   esac;
  65 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  66 am__install_max = 40
  67 am__nobase_strip_setup = \
  68   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  69 am__nobase_strip = \
  70   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  71 am__nobase_list = $(am__nobase_strip_setup); \
  72   for p in $$list; do echo "$$p $$p"; done | \
  73   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  74   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  75     if (++n[$$2] == $(am__install_max)) \
  76       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  77     END { for (dir in files) print dir, files[dir] }'
  78 am__base_list = \
  79   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  80   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  81 man3dir = $(mandir)/man3
  82 am__installdirs = "$(DESTDIR)$(man3dir)"
  83 NROFF = nroff
  84 MANS = $(man_MANS)
  85 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  86 ACLOCAL = ${SHELL} /e/sdk/deps/libffi-3.0.11/missing --run aclocal-1.11
  87 ALLOCA =
  88 AMTAR = ${SHELL} /e/sdk/deps/libffi-3.0.11/missing --run tar
  89 AM_LTLDFLAGS = -no-undefined -bindir "$(bindir)"
  90 AM_RUNTESTFLAGS =
  91 AR = ar
  92 AUTOCONF = ${SHELL} /e/sdk/deps/libffi-3.0.11/missing --run autoconf
  93 AUTOHEADER = ${SHELL} /e/sdk/deps/libffi-3.0.11/missing --run autoheader
  94 AUTOMAKE = ${SHELL} /e/sdk/deps/libffi-3.0.11/missing --run automake-1.11
  95 AWK = gawk
  96 CC = gcc
  97 CCAS = gcc
  98 CCASDEPMODE = depmode=gcc3
  99 CCASFLAGS =
 100 CCDEPMODE = depmode=gcc3
 101 CFLAGS = -O3 -fomit-frame-pointer -malign-double -fstrict-aliasing -ffast-math -march=pentium2 -Wall -fexceptions
 102 CPP = gcc -E
 103 CPPFLAGS =
 104 CYGPATH_W = echo
 105 DEFS = -DHAVE_CONFIG_H
 106 DEPDIR = .deps
 107 DLLTOOL = dlltool
 108 DSYMUTIL =
 109 DUMPBIN =
 110 ECHO_C =
 111 ECHO_N = -n
 112 ECHO_T =
 113 EGREP = /bin/grep -E
 114 EXEEXT = .exe
 115 FFI_EXEC_TRAMPOLINE_TABLE = 0
 116 FGREP = /bin/grep -F
 117 GREP = /bin/grep
 118 HAVE_LONG_DOUBLE = 1
 119 INSTALL = /bin/install -c
 120 INSTALL_DATA = ${INSTALL} -m 644
 121 INSTALL_PROGRAM = ${INSTALL}
 122 INSTALL_SCRIPT = ${INSTALL}
 123 INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
 124 LD = e:/msys/1.0/mingw32/bin/ld.exe
 125 LDFLAGS =
 126 LIBOBJS =
 127 LIBS =
 128 LIBTOOL = $(SHELL) $(top_builddir)/libtool
 129 LIPO =
 130 LN_S = cp -p
 131 LTLIBOBJS =
 132 MAINT = #
 133 MAKEINFO = ${SHELL} /e/sdk/deps/libffi-3.0.11/missing --run makeinfo
 134 MANIFEST_TOOL = :
 135 MKDIR_P = /bin/mkdir -p
 136 NM = /bin/nm
 137 NMEDIT =
 138 OBJDUMP = objdump
 139 OBJEXT = o
 140 OTOOL =
 141 OTOOL64 =
 142 PACKAGE = libffi
 143 PACKAGE_BUGREPORT = http://github.com/atgreen/libffi/issues
 144 PACKAGE_NAME = libffi
 145 PACKAGE_STRING = libffi 3.0.11
 146 PACKAGE_TARNAME = libffi
 147 PACKAGE_URL =
 148 PACKAGE_VERSION = 3.0.11
 149 PATH_SEPARATOR = :
 150 PRTDIAG =
 151 RANLIB = ranlib
 152 SED = /bin/sed
 153 SET_MAKE =
 154 SHELL = /bin/sh
 155 STRIP = strip
 156 TARGET = X86_WIN32
 157 TARGETDIR = x86
 158 VERSION = 3.0.11
 159 abs_builddir = /e/sdk/deps/libffi-3.0.11/i686-pc-mingw32/man
 160 abs_srcdir = /e/sdk/deps/libffi-3.0.11/i686-pc-mingw32/../man
 161 abs_top_builddir = /e/sdk/deps/libffi-3.0.11/i686-pc-mingw32
 162 abs_top_srcdir = /e/sdk/deps/libffi-3.0.11/i686-pc-mingw32/..
 163 ac_ct_AR = ar
 164 ac_ct_CC = gcc
 165 ac_ct_DUMPBIN =
 166 am__include = include
 167 am__leading_dot = .
 168 am__quote =
 169 am__tar = ${AMTAR} chof - "$$tardir"
 170 am__untar = ${AMTAR} xf -
 171 ax_enable_builddir_sed = sed
 172 bindir = ${exec_prefix}/bin
 173 build = i686-pc-mingw32
 174 build_alias =
 175 build_cpu = i686
 176 build_os = mingw32
 177 build_vendor = pc
 178 builddir = .
 179 datadir = ${datarootdir}
 180 datarootdir = ${prefix}/share
 181 docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
 182 dvidir = ${docdir}
 183 exec_prefix = ${prefix}
 184 host = i686-pc-mingw32
 185 host_alias =
 186 host_cpu = i686
 187 host_os = mingw32
 188 host_vendor = pc
 189 htmldir = ${docdir}
 190 includedir = ${prefix}/include
 191 infodir = ${datarootdir}/info
 192 install_sh = ${SHELL} /e/sdk/deps/libffi-3.0.11/install-sh
 193 libdir = ${exec_prefix}/lib
 194 libexecdir = ${exec_prefix}/libexec
 195 localedir = ${datarootdir}/locale
 196 localstatedir = ${prefix}/var
 197 mandir = ${datarootdir}/man
 198 mkdir_p = /bin/mkdir -p
 199 oldincludedir = /usr/include
 200 pdfdir = ${docdir}
 201 prefix = /usr/local
 202 program_transform_name = s,x,x,
 203 psdir = ${docdir}
 204 sbindir = ${exec_prefix}/sbin
 205 sharedstatedir = ${prefix}/com
 206 srcdir = ../../man
 207 sys_symbol_underscore =
 208 sysconfdir = ${prefix}/etc
 209 target = i686-pc-mingw32
 210 target_alias =
 211 target_cpu = i686
 212 target_os = mingw32
 213 target_vendor = pc
 214 toolexecdir = $(libdir)/gcc-lib/$(target_alias)
 215 toolexeclibdir = $(libdir)
 216 top_build_prefix = ../
 217 top_builddir = ..
 218 top_srcdir = ../..
 219 AUTOMAKE_OPTIONS = foreign
 220 EXTRA_DIST = ffi.3 ffi_call.3 ffi_prep_cif.3 ffi_prep_cif_var.3
 221 man_MANS = ffi.3 ffi_call.3 ffi_prep_cif.3 ffi_prep_cif_var.3
 222 all: all-am
 223
 224 .SUFFIXES:
 225 $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
 226         @for dep in $?; do \
 227           case '$(am__configure_deps)' in \
 228             *$$dep*) \
 229               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 230                 && { if test -f $@; then exit 0; else break; fi; }; \
 231               exit 1;; \
 232           esac; \
 233         done; \
 234         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \
 235         $(am__cd) $(top_srcdir) && \
 236           $(AUTOMAKE) --foreign man/Makefile
 237 .PRECIOUS: Makefile
 238 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 239         @case '$?' in \
 240           *config.status*) \
 241             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 242           *) \
 243             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 244             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 245         esac;
 246
 247 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 248         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 249
 250 $(top_srcdir)/configure: # $(am__configure_deps)
 251         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 252 $(ACLOCAL_M4): # $(am__aclocal_m4_deps)
 253         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 254 $(am__aclocal_m4_deps):
 255
 256 mostlyclean-libtool:
 257         -rm -f *.lo
 258
 259 clean-libtool:
 260         -rm -rf .libs _libs
 261 install-man3: $(man_MANS)
 262         @$(NORMAL_INSTALL)
 263         test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
 264         @list=''; test -n "$(man3dir)" || exit 0; \
 265         { for i in $$list; do echo "$$i"; done; \
 266         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 267           sed -n '/\.3[a-z]*$$/p'; \
 268         } | while read p; do \
 269           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 270           echo "$$d$$p"; echo "$$p"; \
 271         done | \
 272         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
 273               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 274         sed 'N;N;s,\n, ,g' | { \
 275         list=; while read file base inst; do \
 276           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 277             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
 278             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
 279           fi; \
 280         done; \
 281         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 282         while read files; do \
 283           test -z "$$files" || { \
 284             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
 285             $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
 286         done; }
 287
 288 uninstall-man3:
 289         @$(NORMAL_UNINSTALL)
 290         @list=''; test -n "$(man3dir)" || exit 0; \
 291         files=`{ for i in $$list; do echo "$$i"; done; \
 292         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 293           sed -n '/\.3[a-z]*$$/p'; \
 294         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
 295               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 296         test -z "$$files" || { \
 297           echo " ( cd '$(DESTDIR)$(man3dir)' && rm -f" $$files ")"; \
 298           cd "$(DESTDIR)$(man3dir)" && rm -f $$files; }
 299 tags: TAGS
 300 TAGS:
 301
 302 ctags: CTAGS
 303 CTAGS:
 304
 305
 306 distdir: $(DISTFILES)
 307         @list='$(MANS)'; if test -n "$$list"; then \
 308           list=`for p in $$list; do \
 309             if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 310             if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
 311           if test -n "$$list" && \
 312             grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
 313             echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
 314             grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
 315             echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
 316             echo "       typically \`make maintainer-clean' will remove them" >&2; \
 317             exit 1; \
 318           else :; fi; \
 319         else :; fi
 320         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 321         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 322         list='$(DISTFILES)'; \
 323           dist_files=`for file in $$list; do echo $$file; done | \
 324           sed -e "s|^$$srcdirstrip/||;t" \
 325               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 326         case $$dist_files in \
 327           */*) $(MKDIR_P) `echo "$$dist_files" | \
 328                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 329                            sort -u` ;; \
 330         esac; \
 331         for file in $$dist_files; do \
 332           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 333           if test -d $$d/$$file; then \
 334             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 335             if test -d "$(distdir)/$$file"; then \
 336               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 337             fi; \
 338             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 339               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 340               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 341             fi; \
 342             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 343           else \
 344             test -f "$(distdir)/$$file" \
 345             || cp -p $$d/$$file "$(distdir)/$$file" \
 346             || exit 1; \
 347           fi; \
 348         done
 349 check-am: all-am
 350 check: check-am
 351 all-am: Makefile $(MANS)
 352 installdirs:
 353         for dir in "$(DESTDIR)$(man3dir)"; do \
 354           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 355         done
 356 install: install-am
 357 install-exec: install-exec-am
 358 install-data: install-data-am
 359 uninstall: uninstall-am
 360
 361 install-am: all-am
 362         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 363
 364 installcheck: installcheck-am
 365 install-strip:
 366         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 367           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 368           `test -z '$(STRIP)' || \
 369             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 370 mostlyclean-generic:
 371
 372 clean-generic:
 373
 374 distclean-generic:
 375         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 376         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 377
 378 maintainer-clean-generic:
 379         @echo "This command is intended for maintainers to use"
 380         @echo "it deletes files that may require special tools to rebuild."
 381 clean: clean-am
 382
 383 clean-am: clean-generic clean-libtool mostlyclean-am
 384
 385 distclean: distclean-am
 386         -rm -f Makefile
 387 distclean-am: clean-am distclean-generic
 388
 389 dvi: dvi-am
 390
 391 dvi-am:
 392
 393 html: html-am
 394
 395 html-am:
 396
 397 info: info-am
 398
 399 info-am:
 400
 401 install-data-am: install-man
 402
 403 install-dvi: install-dvi-am
 404
 405 install-dvi-am:
 406
 407 install-exec-am:
 408
 409 install-html: install-html-am
 410
 411 install-html-am:
 412
 413 install-info: install-info-am
 414
 415 install-info-am:
 416
 417 install-man: install-man3
 418
 419 install-pdf: install-pdf-am
 420
 421 install-pdf-am:
 422
 423 install-ps: install-ps-am
 424
 425 install-ps-am:
 426
 427 installcheck-am:
 428
 429 maintainer-clean: maintainer-clean-am
 430         -rm -f Makefile
 431 maintainer-clean-am: distclean-am maintainer-clean-generic
 432
 433 mostlyclean: mostlyclean-am
 434
 435 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 436
 437 pdf: pdf-am
 438
 439 pdf-am:
 440
 441 ps: ps-am
 442
 443 ps-am:
 444
 445 uninstall-am: uninstall-man
 446
 447 uninstall-man: uninstall-man3
 448
 449 .MAKE: install-am install-strip
 450
 451 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
 452         distclean distclean-generic distclean-libtool distdir dvi \
 453         dvi-am html html-am info info-am install install-am \
 454         install-data install-data-am install-dvi install-dvi-am \
 455         install-exec install-exec-am install-html install-html-am \
 456         install-info install-info-am install-man install-man3 \
 457         install-pdf install-pdf-am install-ps install-ps-am \
 458         install-strip installcheck installcheck-am installdirs \
 459         maintainer-clean maintainer-clean-generic mostlyclean \
 460         mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 461         uninstall uninstall-am uninstall-man uninstall-man3
 462
 463
 464 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 465 # Otherwise a system limit (for SysV at least) may be exceeded.
 466 .NOEXPORT: