** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
-#define SQLITE_VERSION "3.9.1"
-#define SQLITE_VERSION_NUMBER 3009001
-#define SQLITE_SOURCE_ID "2015-10-16 17:31:12 767c1727fec4ce11b83f25b3f1bfcfe68a2c8b02"
+#define SQLITE_VERSION "3.11.1"
+#define SQLITE_VERSION_NUMBER 3011001
+#define SQLITE_SOURCE_ID "2016-03-03 16:17:53 f047920ce16971e573bc6ec9a48b118c9de2b3a7"
/*
** CAPI3REF: Run-Time Library Version Numbers
** from [sqlite3_malloc()] and passed back through the 5th parameter.
** To avoid memory leaks, the application should invoke [sqlite3_free()]
** on error message strings returned through the 5th parameter of
-** of sqlite3_exec() after the error message string is no longer needed.
+** sqlite3_exec() after the error message string is no longer needed.
** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors
** occur, then sqlite3_exec() sets the pointer in its 5th parameter to
** NULL before returning.
#define SQLITE_IOERR_GETTEMPPATH (SQLITE_IOERR | (25<<8))
#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8))
#define SQLITE_IOERR_VNODE (SQLITE_IOERR | (27<<8))
+#define SQLITE_IOERR_AUTH (SQLITE_IOERR | (28<<8))
#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8))
#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8))
#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8))
** <li>[[SQLITE_FCNTL_FILE_POINTER]]
** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer
** to the [sqlite3_file] object associated with a particular database
-** connection. See the [sqlite3_file_control()] documentation for
-** additional information.
+** connection. See also [SQLITE_FCNTL_JOURNAL_POINTER].
+**
+** <li>[[SQLITE_FCNTL_JOURNAL_POINTER]]
+** The [SQLITE_FCNTL_JOURNAL_POINTER] opcode is used to obtain a pointer
+** to the [sqlite3_file] object associated with the journal file (either
+** the [rollback journal] or the [write-ahead log]) for a particular database
+** connection. See also [SQLITE_FCNTL_FILE_POINTER].
**
** <li>[[SQLITE_FCNTL_SYNC_OMITTED]]
** No longer in use.
** pointer in case this file-control is not implemented. This file-control
** is intended for diagnostic use only.
**
+** <li>[[SQLITE_FCNTL_VFS_POINTER]]
+** ^The [SQLITE_FCNTL_VFS_POINTER] opcode finds a pointer to the top-level
+** [VFSes] currently in use. ^(The argument X in
+** sqlite3_file_control(db,SQLITE_FCNTL_VFS_POINTER,X) must be
+** of type "[sqlite3_vfs] **". This opcodes will set *X
+** to a pointer to the top-level VFS.)^
+** ^When there are multiple VFS shims in the stack, this opcode finds the
+** upper-most shim only.
+**
** <li>[[SQLITE_FCNTL_PRAGMA]]
** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA]
** file control is sent to the open [sqlite3_file] object corresponding
#define SQLITE_FCNTL_WAL_BLOCK 24
#define SQLITE_FCNTL_ZIPVFS 25
#define SQLITE_FCNTL_RBU 26
+#define SQLITE_FCNTL_VFS_POINTER 27
+#define SQLITE_FCNTL_JOURNAL_POINTER 28
/* deprecated names */
#define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE
** </dd>
**
** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
-** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a static memory buffer
+** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a memory pool
** that SQLite can use for the database page cache with the default page
** cache implementation.
-** This configuration should not be used if an application-define page
-** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2]
-** configuration option.
+** This configuration option is a no-op if an application-define page
+** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2].
** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to
-** 8-byte aligned
-** memory, the size of each page buffer (sz), and the number of pages (N).
+** 8-byte aligned memory (pMem), the size of each page cache line (sz),
+** and the number of cache lines (N).
** The sz argument should be the size of the largest database page
** (a power of two between 512 and 65536) plus some extra bytes for each
** page header. ^The number of extra bytes needed by the page header
-** can be determined using the [SQLITE_CONFIG_PCACHE_HDRSZ] option
-** to [sqlite3_config()].
+** can be determined using [SQLITE_CONFIG_PCACHE_HDRSZ].
** ^It is harmless, apart from the wasted memory,
-** for the sz parameter to be larger than necessary. The first
-** argument should pointer to an 8-byte aligned block of memory that
-** is at least sz*N bytes of memory, otherwise subsequent behavior is
-** undefined.
-** ^SQLite will use the memory provided by the first argument to satisfy its
-** memory needs for the first N pages that it adds to cache. ^If additional
-** page cache memory is needed beyond what is provided by this option, then
-** SQLite goes to [sqlite3_malloc()] for the additional storage space.</dd>
+** for the sz parameter to be larger than necessary. The pMem
+** argument must be either a NULL pointer or a pointer to an 8-byte
+** aligned block of memory of at least sz*N bytes, otherwise
+** subsequent behavior is undefined.
+** ^When pMem is not NULL, SQLite will strive to use the memory provided
+** to satisfy page cache needs, falling back to [sqlite3_malloc()] if
+** a page cache line is larger than sz bytes or if all of the pMem buffer
+** is exhausted.
+** ^If pMem is NULL and N is non-zero, then each database connection
+** does an initial bulk allocation for page cache memory
+** from [sqlite3_malloc()] sufficient for N cache lines if N is positive or
+** of -1024*N bytes if N is negative, . ^If additional
+** page cache memory is needed beyond what is provided by the initial
+** allocation, then SQLite goes to [sqlite3_malloc()] separately for each
+** additional cache line. </dd>
**
** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>
** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer
** previously obtained from [sqlite3_value_dup()]. ^If V is a NULL pointer
** then sqlite3_value_free(V) is a harmless no-op.
*/
-SQLITE_API SQLITE_EXPERIMENTAL sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value*);
-SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_value_free(sqlite3_value*);
+SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value*);
+SQLITE_API void SQLITE_STDCALL sqlite3_value_free(sqlite3_value*);
/*
** CAPI3REF: Obtain Aggregate Function Context
** ^Information about the ORDER BY clause is stored in aOrderBy[].
** ^Each term of aOrderBy records a column of the ORDER BY clause.
**
+** The colUsed field indicates which columns of the virtual table may be
+** required by the current scan. Virtual table columns are numbered from
+** zero in the order in which they appear within the CREATE TABLE statement
+** passed to sqlite3_declare_vtab(). For the first 63 columns (columns 0-62),
+** the corresponding bit is set within the colUsed mask if the column may be
+** required by SQLite. If the table has at least 64 columns and any column
+** to the right of the first 63 is required, then bit 63 of colUsed is also
+** set. In other words, column iCol may be required if the expression
+** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to
+** non-zero.
+**
** The [xBestIndex] method must fill aConstraintUsage[] with information
** about what parameters to pass to xFilter. ^If argvIndex>0 then
** the right-hand side of the corresponding aConstraint[] is evaluated
/* Inputs */
int nConstraint; /* Number of entries in aConstraint */
struct sqlite3_index_constraint {
- int iColumn; /* Column on left-hand side of constraint */
+ int iColumn; /* Column constrained. -1 for ROWID */
unsigned char op; /* Constraint operator */
unsigned char usable; /* True if this constraint is usable */
int iTermOffset; /* Used internally - xBestIndex should ignore */
sqlite3_int64 estimatedRows; /* Estimated number of rows returned */
/* Fields below are only available in SQLite 3.9.0 and later */
int idxFlags; /* Mask of SQLITE_INDEX_SCAN_* flags */
+ /* Fields below are only available in SQLite 3.10.0 and later */
+ sqlite3_uint64 colUsed; /* Input: Mask of columns used by statement */
};
/*
** an operator that is part of a constraint term in the wHERE clause of
** a query that uses a [virtual table].
*/
-#define SQLITE_INDEX_CONSTRAINT_EQ 2
-#define SQLITE_INDEX_CONSTRAINT_GT 4
-#define SQLITE_INDEX_CONSTRAINT_LE 8
-#define SQLITE_INDEX_CONSTRAINT_LT 16
-#define SQLITE_INDEX_CONSTRAINT_GE 32
-#define SQLITE_INDEX_CONSTRAINT_MATCH 64
+#define SQLITE_INDEX_CONSTRAINT_EQ 2
+#define SQLITE_INDEX_CONSTRAINT_GT 4
+#define SQLITE_INDEX_CONSTRAINT_LE 8
+#define SQLITE_INDEX_CONSTRAINT_LT 16
+#define SQLITE_INDEX_CONSTRAINT_GE 32
+#define SQLITE_INDEX_CONSTRAINT_MATCH 64
+#define SQLITE_INDEX_CONSTRAINT_LIKE 65
+#define SQLITE_INDEX_CONSTRAINT_GLOB 66
+#define SQLITE_INDEX_CONSTRAINT_REGEXP 67
/*
** CAPI3REF: Register A Virtual Table Implementation
** The value written into the *pCurrent parameter is undefined.</dd>)^
**
** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
-** <dd>This parameter records the deepest parser stack. It is only
+** <dd>The *pHighwater parameter records the deepest parser stack.
+** The *pCurrent value is undefined. The *pHighwater value is only
** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
** </dl>
**
/*
** CAPI3REF: String Globbing
*
-** ^The [sqlite3_strglob(P,X)] interface returns zero if string X matches
-** the glob pattern P, and it returns non-zero if string X does not match
-** the glob pattern P. ^The definition of glob pattern matching used in
+** ^The [sqlite3_strglob(P,X)] interface returns zero if and only if
+** string X matches the [GLOB] pattern P.
+** ^The definition of [GLOB] pattern matching used in
** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the
-** SQL dialect used by SQLite. ^The sqlite3_strglob(P,X) function is case
-** sensitive.
+** SQL dialect understood by SQLite. ^The [sqlite3_strglob(P,X)] function
+** is case sensitive.
**
** Note that this routine returns zero on a match and non-zero if the strings
** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+**
+** See also: [sqlite3_strlike()].
*/
SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlob, const char *zStr);
/*
+** CAPI3REF: String LIKE Matching
+*
+** ^The [sqlite3_strlike(P,X,E)] interface returns zero if and only if
+** string X matches the [LIKE] pattern P with escape character E.
+** ^The definition of [LIKE] pattern matching used in
+** [sqlite3_strlike(P,X,E)] is the same as for the "X LIKE P ESCAPE E"
+** operator in the SQL dialect understood by SQLite. ^For "X LIKE P" without
+** the ESCAPE clause, set the E parameter of [sqlite3_strlike(P,X,E)] to 0.
+** ^As with the LIKE operator, the [sqlite3_strlike(P,X,E)] function is case
+** insensitive - equivalent upper and lower case ASCII characters match
+** one another.
+**
+** ^The [sqlite3_strlike(P,X,E)] function matches Unicode characters, though
+** only ASCII characters are case folded.
+**
+** Note that this routine returns zero on a match and non-zero if the strings
+** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+**
+** See also: [sqlite3_strglob()].
+*/
+SQLITE_API int SQLITE_STDCALL sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
+
+/*
** CAPI3REF: Error Logging Interface
**
** ^The [sqlite3_log()] interface writes a message into the [error log]
*/
SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
+/*
+** CAPI3REF: Flush caches to disk mid-transaction
+**
+** ^If a write-transaction is open on [database connection] D when the
+** [sqlite3_db_cacheflush(D)] interface invoked, any dirty
+** pages in the pager-cache that are not currently in use are written out
+** to disk. A dirty page may be in use if a database cursor created by an
+** active SQL statement is reading from it, or if it is page 1 of a database
+** file (page 1 is always "in use"). ^The [sqlite3_db_cacheflush(D)]
+** interface flushes caches for all schemas - "main", "temp", and
+** any [attached] databases.
+**
+** ^If this function needs to obtain extra database locks before dirty pages
+** can be flushed to disk, it does so. ^If those locks cannot be obtained
+** immediately and there is a busy-handler callback configured, it is invoked
+** in the usual manner. ^If the required lock still cannot be obtained, then
+** the database is skipped and an attempt made to flush any dirty pages
+** belonging to the next (if any) database. ^If any databases are skipped
+** because locks cannot be obtained, but no other error occurs, this
+** function returns SQLITE_BUSY.
+**
+** ^If any other error occurs while flushing dirty pages to disk (for
+** example an IO error or out-of-memory condition), then processing is
+** abandoned and an SQLite [error code] is returned to the caller immediately.
+**
+** ^Otherwise, if no error occurs, [sqlite3_db_cacheflush()] returns SQLITE_OK.
+**
+** ^This function does not set the database handle error code or message
+** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions.
+*/
+SQLITE_API int SQLITE_STDCALL sqlite3_db_cacheflush(sqlite3*);
+
+/*
+** CAPI3REF: Database Snapshot
+** KEYWORDS: {snapshot}
+** EXPERIMENTAL
+**
+** An instance of the snapshot object records the state of a [WAL mode]
+** database for some specific point in history.
+**
+** In [WAL mode], multiple [database connections] that are open on the
+** same database file can each be reading a different historical version
+** of the database file. When a [database connection] begins a read
+** transaction, that connection sees an unchanging copy of the database
+** as it existed for the point in time when the transaction first started.
+** Subsequent changes to the database from other connections are not seen
+** by the reader until a new read transaction is started.
+**
+** The sqlite3_snapshot object records state information about an historical
+** version of the database file so that it is possible to later open a new read
+** transaction that sees that historical version of the database rather than
+** the most recent version.
+**
+** The constructor for this object is [sqlite3_snapshot_get()]. The
+** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer
+** to an historical snapshot (if possible). The destructor for
+** sqlite3_snapshot objects is [sqlite3_snapshot_free()].
+*/
+typedef struct sqlite3_snapshot sqlite3_snapshot;
+
+/*
+** CAPI3REF: Record A Database Snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a
+** new [sqlite3_snapshot] object that records the current state of
+** schema S in database connection D. ^On success, the
+** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly
+** created [sqlite3_snapshot] object into *P and returns SQLITE_OK.
+** ^If schema S of [database connection] D is not a [WAL mode] database
+** that is in a read transaction, then [sqlite3_snapshot_get(D,S,P)]
+** leaves the *P value unchanged and returns an appropriate [error code].
+**
+** The [sqlite3_snapshot] object returned from a successful call to
+** [sqlite3_snapshot_get()] must be freed using [sqlite3_snapshot_free()]
+** to avoid a memory leak.
+**
+** The [sqlite3_snapshot_get()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_get(
+ sqlite3 *db,
+ const char *zSchema,
+ sqlite3_snapshot **ppSnapshot
+);
+
+/*
+** CAPI3REF: Start a read transaction on an historical snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_open(D,S,P)] interface attempts to move the
+** read transaction that is currently open on schema S of
+** [database connection] D so that it refers to historical [snapshot] P.
+** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success
+** or an appropriate [error code] if it fails.
+**
+** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be
+** the first operation, apart from other sqlite3_snapshot_open() calls,
+** following the [BEGIN] that starts a new read transaction.
+** ^A [snapshot] will fail to open if it has been overwritten by a
+** [checkpoint].
+**
+** The [sqlite3_snapshot_open()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_open(
+ sqlite3 *db,
+ const char *zSchema,
+ sqlite3_snapshot *pSnapshot
+);
+
+/*
+** CAPI3REF: Destroy a snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P.
+** The application must eventually free every [sqlite3_snapshot] object
+** using this routine to avoid a memory leak.
+**
+** The [sqlite3_snapshot_free()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_snapshot_free(sqlite3_snapshot*);
/*
** Undo the hack that converts floating point types to integer for
** an OOM condition or IO error), an appropriate SQLite error code is
** returned.
**
+** This function may be quite inefficient if used with an FTS5 table
+** created with the "columnsize=0" option.
+**
** xColumnText:
** This function attempts to retrieve the text of column iCol of the
** current document. If successful, (*pz) is set to point to a buffer
** the query within the current row. Return SQLITE_OK if successful, or
** an error code (i.e. SQLITE_NOMEM) if an error occurs.
**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option. If the FTS5 table is created
+** with either "detail=none" or "detail=column" and "content=" option
+** (i.e. if it is a contentless table), then this API always returns 0.
+**
** xInst:
** Query for the details of phrase match iIdx within the current row.
** Phrase matches are numbered starting from zero, so the iIdx argument
** should be greater than or equal to zero and smaller than the value
** output by xInstCount().
**
+** Usually, output parameter *piPhrase is set to the phrase number, *piCol
+** to the column in which it occurs and *piOff the token offset of the
+** first token of the phrase. The exception is if the table was created
+** with the offsets=0 option specified. In this case *piOff is always
+** set to -1.
+**
** Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM)
** if an error occurs.
**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option.
+**
** xRowid:
** Returns the rowid of the current row.
**
** Fts5PhraseIter iter;
** int iCol, iOff;
** for(pApi->xPhraseFirst(pFts, iPhrase, &iter, &iCol, &iOff);
-** iOff>=0;
+** iCol>=0;
** pApi->xPhraseNext(pFts, &iter, &iCol, &iOff)
** ){
** // An instance of phrase iPhrase at offset iOff of column iCol
**
** The Fts5PhraseIter structure is defined above. Applications should not
** modify this structure directly - it should only be used as shown above
-** with the xPhraseFirst() and xPhraseNext() API methods.
+** with the xPhraseFirst() and xPhraseNext() API methods (and by
+** xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below).
+**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option. If the FTS5 table is created
+** with either "detail=none" or "detail=column" and "content=" option
+** (i.e. if it is a contentless table), then this API always iterates
+** through an empty set (all calls to xPhraseFirst() set iCol to -1).
**
** xPhraseNext()
** See xPhraseFirst above.
+**
+** xPhraseFirstColumn()
+** This function and xPhraseNextColumn() are similar to the xPhraseFirst()
+** and xPhraseNext() APIs described above. The difference is that instead
+** of iterating through all instances of a phrase in the current row, these
+** APIs are used to iterate through the set of columns in the current row
+** that contain one or more instances of a specified phrase. For example:
+**
+** Fts5PhraseIter iter;
+** int iCol;
+** for(pApi->xPhraseFirstColumn(pFts, iPhrase, &iter, &iCol);
+** iCol>=0;
+** pApi->xPhraseNextColumn(pFts, &iter, &iCol)
+** ){
+** // Column iCol contains at least one instance of phrase iPhrase
+** }
+**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" option. If the FTS5 table is created with either
+** "detail=none" "content=" option (i.e. if it is a contentless table),
+** then this API always iterates through an empty set (all calls to
+** xPhraseFirstColumn() set iCol to -1).
+**
+** The information accessed using this API and its companion
+** xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext
+** (or xInst/xInstCount). The chief advantage of this API is that it is
+** significantly more efficient than those alternatives when used with
+** "detail=column" tables.
+**
+** xPhraseNextColumn()
+** See xPhraseFirstColumn above.
*/
struct Fts5ExtensionApi {
- int iVersion; /* Currently always set to 1 */
+ int iVersion; /* Currently always set to 3 */
void *(*xUserData)(Fts5Context*);
int (*xSetAuxdata)(Fts5Context*, void *pAux, void(*xDelete)(void*));
void *(*xGetAuxdata)(Fts5Context*, int bClear);
- void (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
+ int (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
void (*xPhraseNext)(Fts5Context*, Fts5PhraseIter*, int *piCol, int *piOff);
+
+ int (*xPhraseFirstColumn)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*);
+ void (*xPhraseNextColumn)(Fts5Context*, Fts5PhraseIter*, int *piCol);
};
/*
Ecere Software / sdk / blobdiff