--- /dev/null
+/*
+ * jcmaster.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2003-2013 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains master control logic for the JPEG compressor.
+ * These routines are concerned with parameter validation, initial setup,
+ * and inter-pass control (determining the number of passes and the work
+ * to be done in each pass).
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Private state */
+
+typedef enum {
+ main_pass, /* input data, also do first output step */
+ huff_opt_pass, /* Huffman code optimization pass */
+ output_pass /* data output pass */
+} c_pass_type;
+
+typedef struct {
+ struct jpeg_comp_master pub; /* public fields */
+
+ c_pass_type pass_type; /* the type of the current pass */
+
+ int pass_number; /* # of passes completed */
+ int total_passes; /* total # of passes needed */
+
+ int scan_number; /* current index in scan_info[] */
+} my_comp_master;
+
+typedef my_comp_master * my_master_ptr;
+
+
+/*
+ * Support routines that do various essential calculations.
+ */
+
+/*
+ * Compute JPEG image dimensions and related values.
+ * NOTE: this is exported for possible use by application.
+ * Hence it mustn't do anything that can't be done twice.
+ */
+
+GLOBAL(void)
+jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo)
+/* Do computations that are needed before master selection phase */
+{
+#ifdef DCT_SCALING_SUPPORTED
+
+ /* Sanity check on input image dimensions to prevent overflow in
+ * following calculation.
+ * We do check jpeg_width and jpeg_height in initial_setup below,
+ * but image_width and image_height can come from arbitrary data,
+ * and we need some space for multiplication by block_size.
+ */
+ if (((long) cinfo->image_width >> 24) || ((long) cinfo->image_height >> 24))
+ ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
+
+ /* Compute actual JPEG image dimensions and DCT scaling choices. */
+ if (cinfo->scale_num >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/1 scaling */
+ cinfo->jpeg_width = cinfo->image_width * cinfo->block_size;
+ cinfo->jpeg_height = cinfo->image_height * cinfo->block_size;
+ cinfo->min_DCT_h_scaled_size = 1;
+ cinfo->min_DCT_v_scaled_size = 1;
+ } else if (cinfo->scale_num * 2 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/2 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 2L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 2L);
+ cinfo->min_DCT_h_scaled_size = 2;
+ cinfo->min_DCT_v_scaled_size = 2;
+ } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/3 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 3L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 3L);
+ cinfo->min_DCT_h_scaled_size = 3;
+ cinfo->min_DCT_v_scaled_size = 3;
+ } else if (cinfo->scale_num * 4 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/4 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 4L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 4L);
+ cinfo->min_DCT_h_scaled_size = 4;
+ cinfo->min_DCT_v_scaled_size = 4;
+ } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/5 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 5L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 5L);
+ cinfo->min_DCT_h_scaled_size = 5;
+ cinfo->min_DCT_v_scaled_size = 5;
+ } else if (cinfo->scale_num * 6 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/6 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 6L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 6L);
+ cinfo->min_DCT_h_scaled_size = 6;
+ cinfo->min_DCT_v_scaled_size = 6;
+ } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/7 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 7L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 7L);
+ cinfo->min_DCT_h_scaled_size = 7;
+ cinfo->min_DCT_v_scaled_size = 7;
+ } else if (cinfo->scale_num * 8 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/8 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 8L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 8L);
+ cinfo->min_DCT_h_scaled_size = 8;
+ cinfo->min_DCT_v_scaled_size = 8;
+ } else if (cinfo->scale_num * 9 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/9 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 9L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 9L);
+ cinfo->min_DCT_h_scaled_size = 9;
+ cinfo->min_DCT_v_scaled_size = 9;
+ } else if (cinfo->scale_num * 10 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/10 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 10L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 10L);
+ cinfo->min_DCT_h_scaled_size = 10;
+ cinfo->min_DCT_v_scaled_size = 10;
+ } else if (cinfo->scale_num * 11 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/11 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 11L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 11L);
+ cinfo->min_DCT_h_scaled_size = 11;
+ cinfo->min_DCT_v_scaled_size = 11;
+ } else if (cinfo->scale_num * 12 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/12 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 12L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 12L);
+ cinfo->min_DCT_h_scaled_size = 12;
+ cinfo->min_DCT_v_scaled_size = 12;
+ } else if (cinfo->scale_num * 13 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/13 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 13L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 13L);
+ cinfo->min_DCT_h_scaled_size = 13;
+ cinfo->min_DCT_v_scaled_size = 13;
+ } else if (cinfo->scale_num * 14 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/14 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 14L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 14L);
+ cinfo->min_DCT_h_scaled_size = 14;
+ cinfo->min_DCT_v_scaled_size = 14;
+ } else if (cinfo->scale_num * 15 >= cinfo->scale_denom * cinfo->block_size) {
+ /* Provide block_size/15 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 15L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 15L);
+ cinfo->min_DCT_h_scaled_size = 15;
+ cinfo->min_DCT_v_scaled_size = 15;
+ } else {
+ /* Provide block_size/16 scaling */
+ cinfo->jpeg_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 16L);
+ cinfo->jpeg_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 16L);
+ cinfo->min_DCT_h_scaled_size = 16;
+ cinfo->min_DCT_v_scaled_size = 16;
+ }
+
+#else /* !DCT_SCALING_SUPPORTED */
+
+ /* Hardwire it to "no scaling" */
+ cinfo->jpeg_width = cinfo->image_width;
+ cinfo->jpeg_height = cinfo->image_height;
+ cinfo->min_DCT_h_scaled_size = DCTSIZE;
+ cinfo->min_DCT_v_scaled_size = DCTSIZE;
+
+#endif /* DCT_SCALING_SUPPORTED */
+}
+
+
+LOCAL(void)
+jpeg_calc_trans_dimensions (j_compress_ptr cinfo)
+{
+ if (cinfo->min_DCT_h_scaled_size != cinfo->min_DCT_v_scaled_size)
+ ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+ cinfo->min_DCT_h_scaled_size, cinfo->min_DCT_v_scaled_size);
+
+ cinfo->block_size = cinfo->min_DCT_h_scaled_size;
+}
+
+
+LOCAL(void)
+initial_setup (j_compress_ptr cinfo, boolean transcode_only)
+/* Do computations that are needed before master selection phase */
+{
+ int ci, ssize;
+ jpeg_component_info *compptr;
+
+ if (transcode_only)
+ jpeg_calc_trans_dimensions(cinfo);
+ else
+ jpeg_calc_jpeg_dimensions(cinfo);
+
+ /* Sanity check on block_size */
+ if (cinfo->block_size < 1 || cinfo->block_size > 16)
+ ERREXIT2(cinfo, JERR_BAD_DCTSIZE, cinfo->block_size, cinfo->block_size);
+
+ /* Derive natural_order from block_size */
+ switch (cinfo->block_size) {
+ case 2: cinfo->natural_order = jpeg_natural_order2; break;
+ case 3: cinfo->natural_order = jpeg_natural_order3; break;
+ case 4: cinfo->natural_order = jpeg_natural_order4; break;
+ case 5: cinfo->natural_order = jpeg_natural_order5; break;
+ case 6: cinfo->natural_order = jpeg_natural_order6; break;
+ case 7: cinfo->natural_order = jpeg_natural_order7; break;
+ default: cinfo->natural_order = jpeg_natural_order; break;
+ }
+
+ /* Derive lim_Se from block_size */
+ cinfo->lim_Se = cinfo->block_size < DCTSIZE ?
+ cinfo->block_size * cinfo->block_size - 1 : DCTSIZE2-1;
+
+ /* Sanity check on image dimensions */
+ if (cinfo->jpeg_height <= 0 || cinfo->jpeg_width <= 0 ||
+ cinfo->num_components <= 0)
+ ERREXIT(cinfo, JERR_EMPTY_IMAGE);
+
+ /* Make sure image isn't bigger than I can handle */
+ if ((long) cinfo->jpeg_height > (long) JPEG_MAX_DIMENSION ||
+ (long) cinfo->jpeg_width > (long) JPEG_MAX_DIMENSION)
+ ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
+
+ /* Only 8 to 12 bits data precision are supported for DCT based JPEG */
+ if (cinfo->data_precision < 8 || cinfo->data_precision > 12)
+ ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
+
+ /* Check that number of components won't exceed internal array sizes */
+ if (cinfo->num_components > MAX_COMPONENTS)
+ ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+ MAX_COMPONENTS);
+
+ /* Compute maximum sampling factors; check factor validity */
+ cinfo->max_h_samp_factor = 1;
+ cinfo->max_v_samp_factor = 1;
+ for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+ ci++, compptr++) {
+ if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
+ compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
+ ERREXIT(cinfo, JERR_BAD_SAMPLING);
+ cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
+ compptr->h_samp_factor);
+ cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
+ compptr->v_samp_factor);
+ }
+
+ /* Compute dimensions of components */
+ for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+ ci++, compptr++) {
+ /* Fill in the correct component_index value; don't rely on application */
+ compptr->component_index = ci;
+ /* In selecting the actual DCT scaling for each component, we try to
+ * scale down the chroma components via DCT scaling rather than downsampling.
+ * This saves time if the downsampler gets to use 1:1 scaling.
+ * Note this code adapts subsampling ratios which are powers of 2.
+ */
+ ssize = 1;
+#ifdef DCT_SCALING_SUPPORTED
+ while (cinfo->min_DCT_h_scaled_size * ssize <=
+ (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) &&
+ (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) {
+ ssize = ssize * 2;
+ }
+#endif
+ compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize;
+ ssize = 1;
+#ifdef DCT_SCALING_SUPPORTED
+ while (cinfo->min_DCT_v_scaled_size * ssize <=
+ (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) &&
+ (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) {
+ ssize = ssize * 2;
+ }
+#endif
+ compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize;
+
+ /* We don't support DCT ratios larger than 2. */
+ if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2)
+ compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2;
+ else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2)
+ compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2;
+
+ /* Size in DCT blocks */
+ compptr->width_in_blocks = (JDIMENSION)
+ jdiv_round_up((long) cinfo->jpeg_width * (long) compptr->h_samp_factor,
+ (long) (cinfo->max_h_samp_factor * cinfo->block_size));
+ compptr->height_in_blocks = (JDIMENSION)
+ jdiv_round_up((long) cinfo->jpeg_height * (long) compptr->v_samp_factor,
+ (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+ /* Size in samples */
+ compptr->downsampled_width = (JDIMENSION)
+ jdiv_round_up((long) cinfo->jpeg_width *
+ (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size),
+ (long) (cinfo->max_h_samp_factor * cinfo->block_size));
+ compptr->downsampled_height = (JDIMENSION)
+ jdiv_round_up((long) cinfo->jpeg_height *
+ (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size),
+ (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+ /* Don't need quantization scale after DCT,
+ * until color conversion says otherwise.
+ */
+ compptr->component_needed = FALSE;
+ }
+
+ /* Compute number of fully interleaved MCU rows (number of times that
+ * main controller will call coefficient controller).
+ */
+ cinfo->total_iMCU_rows = (JDIMENSION)
+ jdiv_round_up((long) cinfo->jpeg_height,
+ (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+}
+
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+
+LOCAL(void)
+validate_script (j_compress_ptr cinfo)
+/* Verify that the scan script in cinfo->scan_info[] is valid; also
+ * determine whether it uses progressive JPEG, and set cinfo->progressive_mode.
+ */
+{
+ const jpeg_scan_info * scanptr;
+ int scanno, ncomps, ci, coefi, thisi;
+ int Ss, Se, Ah, Al;
+ boolean component_sent[MAX_COMPONENTS];
+#ifdef C_PROGRESSIVE_SUPPORTED
+ int * last_bitpos_ptr;
+ int last_bitpos[MAX_COMPONENTS][DCTSIZE2];
+ /* -1 until that coefficient has been seen; then last Al for it */
+#endif
+
+ if (cinfo->num_scans <= 0)
+ ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0);
+
+ /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1;
+ * for progressive JPEG, no scan can have this.
+ */
+ scanptr = cinfo->scan_info;
+ if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) {
+#ifdef C_PROGRESSIVE_SUPPORTED
+ cinfo->progressive_mode = TRUE;
+ last_bitpos_ptr = & last_bitpos[0][0];
+ for (ci = 0; ci < cinfo->num_components; ci++)
+ for (coefi = 0; coefi < DCTSIZE2; coefi++)
+ *last_bitpos_ptr++ = -1;
+#else
+ ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+ } else {
+ cinfo->progressive_mode = FALSE;
+ for (ci = 0; ci < cinfo->num_components; ci++)
+ component_sent[ci] = FALSE;
+ }
+
+ for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) {
+ /* Validate component indexes */
+ ncomps = scanptr->comps_in_scan;
+ if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN)
+ ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN);
+ for (ci = 0; ci < ncomps; ci++) {
+ thisi = scanptr->component_index[ci];
+ if (thisi < 0 || thisi >= cinfo->num_components)
+ ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
+ /* Components must appear in SOF order within each scan */
+ if (ci > 0 && thisi <= scanptr->component_index[ci-1])
+ ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
+ }
+ /* Validate progression parameters */
+ Ss = scanptr->Ss;
+ Se = scanptr->Se;
+ Ah = scanptr->Ah;
+ Al = scanptr->Al;
+ if (cinfo->progressive_mode) {
+#ifdef C_PROGRESSIVE_SUPPORTED
+ /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that
+ * seems wrong: the upper bound ought to depend on data precision.
+ * Perhaps they really meant 0..N+1 for N-bit precision.
+ * Here we allow 0..10 for 8-bit data; Al larger than 10 results in
+ * out-of-range reconstructed DC values during the first DC scan,
+ * which might cause problems for some decoders.
+ */
+#if BITS_IN_JSAMPLE == 8
+#define MAX_AH_AL 10
+#else
+#define MAX_AH_AL 13
+#endif
+ if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 ||
+ Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL)
+ ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+ if (Ss == 0) {
+ if (Se != 0) /* DC and AC together not OK */
+ ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+ } else {
+ if (ncomps != 1) /* AC scans must be for only one component */
+ ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+ }
+ for (ci = 0; ci < ncomps; ci++) {
+ last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0];
+ if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */
+ ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+ for (coefi = Ss; coefi <= Se; coefi++) {
+ if (last_bitpos_ptr[coefi] < 0) {
+ /* first scan of this coefficient */
+ if (Ah != 0)
+ ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+ } else {
+ /* not first scan */
+ if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1)
+ ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+ }
+ last_bitpos_ptr[coefi] = Al;
+ }
+ }
+#endif
+ } else {
+ /* For sequential JPEG, all progression parameters must be these: */
+ if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0)
+ ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+ /* Make sure components are not sent twice */
+ for (ci = 0; ci < ncomps; ci++) {
+ thisi = scanptr->component_index[ci];
+ if (component_sent[thisi])
+ ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
+ component_sent[thisi] = TRUE;
+ }
+ }
+ }
+
+ /* Now verify that everything got sent. */
+ if (cinfo->progressive_mode) {
+#ifdef C_PROGRESSIVE_SUPPORTED
+ /* For progressive mode, we only check that at least some DC data
+ * got sent for each component; the spec does not require that all bits
+ * of all coefficients be transmitted. Would it be wiser to enforce
+ * transmission of all coefficient bits??
+ */
+ for (ci = 0; ci < cinfo->num_components; ci++) {
+ if (last_bitpos[ci][0] < 0)
+ ERREXIT(cinfo, JERR_MISSING_DATA);
+ }
+#endif
+ } else {
+ for (ci = 0; ci < cinfo->num_components; ci++) {
+ if (! component_sent[ci])
+ ERREXIT(cinfo, JERR_MISSING_DATA);
+ }
+ }
+}
+
+
+LOCAL(void)
+reduce_script (j_compress_ptr cinfo)
+/* Adapt scan script for use with reduced block size;
+ * assume that script has been validated before.
+ */
+{
+ jpeg_scan_info * scanptr;
+ int idxout, idxin;
+
+ /* Circumvent const declaration for this function */
+ scanptr = (jpeg_scan_info *) cinfo->scan_info;
+ idxout = 0;
+
+ for (idxin = 0; idxin < cinfo->num_scans; idxin++) {
+ /* After skipping, idxout becomes smaller than idxin */
+ if (idxin != idxout)
+ /* Copy rest of data;
+ * note we stay in given chunk of allocated memory.
+ */
+ scanptr[idxout] = scanptr[idxin];
+ if (scanptr[idxout].Ss > cinfo->lim_Se)
+ /* Entire scan out of range - skip this entry */
+ continue;
+ if (scanptr[idxout].Se > cinfo->lim_Se)
+ /* Limit scan to end of block */
+ scanptr[idxout].Se = cinfo->lim_Se;
+ idxout++;
+ }
+
+ cinfo->num_scans = idxout;
+}
+
+#endif /* C_MULTISCAN_FILES_SUPPORTED */
+
+
+LOCAL(void)
+select_scan_parameters (j_compress_ptr cinfo)
+/* Set up the scan parameters for the current scan */
+{
+ int ci;
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+ if (cinfo->scan_info != NULL) {
+ /* Prepare for current scan --- the script is already validated */
+ my_master_ptr master = (my_master_ptr) cinfo->master;
+ const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number;
+
+ cinfo->comps_in_scan = scanptr->comps_in_scan;
+ for (ci = 0; ci < scanptr->comps_in_scan; ci++) {
+ cinfo->cur_comp_info[ci] =
+ &cinfo->comp_info[scanptr->component_index[ci]];
+ }
+ if (cinfo->progressive_mode) {
+ cinfo->Ss = scanptr->Ss;
+ cinfo->Se = scanptr->Se;
+ cinfo->Ah = scanptr->Ah;
+ cinfo->Al = scanptr->Al;
+ return;
+ }
+ }
+ else
+#endif
+ {
+ /* Prepare for single sequential-JPEG scan containing all components */
+ if (cinfo->num_components > MAX_COMPS_IN_SCAN)
+ ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+ MAX_COMPS_IN_SCAN);
+ cinfo->comps_in_scan = cinfo->num_components;
+ for (ci = 0; ci < cinfo->num_components; ci++) {
+ cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci];
+ }
+ }
+ cinfo->Ss = 0;
+ cinfo->Se = cinfo->block_size * cinfo->block_size - 1;
+ cinfo->Ah = 0;
+ cinfo->Al = 0;
+}
+
+
+LOCAL(void)
+per_scan_setup (j_compress_ptr cinfo)
+/* Do computations that are needed before processing a JPEG scan */
+/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */
+{
+ int ci, mcublks, tmp;
+ jpeg_component_info *compptr;
+
+ if (cinfo->comps_in_scan == 1) {
+
+ /* Noninterleaved (single-component) scan */
+ compptr = cinfo->cur_comp_info[0];
+
+ /* Overall image size in MCUs */
+ cinfo->MCUs_per_row = compptr->width_in_blocks;
+ cinfo->MCU_rows_in_scan = compptr->height_in_blocks;
+
+ /* For noninterleaved scan, always one block per MCU */
+ compptr->MCU_width = 1;
+ compptr->MCU_height = 1;
+ compptr->MCU_blocks = 1;
+ compptr->MCU_sample_width = compptr->DCT_h_scaled_size;
+ compptr->last_col_width = 1;
+ /* For noninterleaved scans, it is convenient to define last_row_height
+ * as the number of block rows present in the last iMCU row.
+ */
+ tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
+ if (tmp == 0) tmp = compptr->v_samp_factor;
+ compptr->last_row_height = tmp;
+
+ /* Prepare array describing MCU composition */
+ cinfo->blocks_in_MCU = 1;
+ cinfo->MCU_membership[0] = 0;
+
+ } else {
+
+ /* Interleaved (multi-component) scan */
+ if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN)
+ ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan,
+ MAX_COMPS_IN_SCAN);
+
+ /* Overall image size in MCUs */
+ cinfo->MCUs_per_row = (JDIMENSION)
+ jdiv_round_up((long) cinfo->jpeg_width,
+ (long) (cinfo->max_h_samp_factor * cinfo->block_size));
+ cinfo->MCU_rows_in_scan = (JDIMENSION)
+ jdiv_round_up((long) cinfo->jpeg_height,
+ (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+
+ cinfo->blocks_in_MCU = 0;
+
+ for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+ compptr = cinfo->cur_comp_info[ci];
+ /* Sampling factors give # of blocks of component in each MCU */
+ compptr->MCU_width = compptr->h_samp_factor;
+ compptr->MCU_height = compptr->v_samp_factor;
+ compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
+ compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size;
+ /* Figure number of non-dummy blocks in last MCU column & row */
+ tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
+ if (tmp == 0) tmp = compptr->MCU_width;
+ compptr->last_col_width = tmp;
+ tmp = (int) (compptr->height_in_blocks % compptr->MCU_height);
+ if (tmp == 0) tmp = compptr->MCU_height;
+ compptr->last_row_height = tmp;
+ /* Prepare array describing MCU composition */
+ mcublks = compptr->MCU_blocks;
+ if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU)
+ ERREXIT(cinfo, JERR_BAD_MCU_SIZE);
+ while (mcublks-- > 0) {
+ cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci;
+ }
+ }
+
+ }
+
+ /* Convert restart specified in rows to actual MCU count. */
+ /* Note that count must fit in 16 bits, so we provide limiting. */
+ if (cinfo->restart_in_rows > 0) {
+ long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row;
+ cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L);
+ }
+}
+
+
+/*
+ * Per-pass setup.
+ * This is called at the beginning of each pass. We determine which modules
+ * will be active during this pass and give them appropriate start_pass calls.
+ * We also set is_last_pass to indicate whether any more passes will be
+ * required.
+ */
+
+METHODDEF(void)
+prepare_for_pass (j_compress_ptr cinfo)
+{
+ my_master_ptr master = (my_master_ptr) cinfo->master;
+
+ switch (master->pass_type) {
+ case main_pass:
+ /* Initial pass: will collect input data, and do either Huffman
+ * optimization or data output for the first scan.
+ */
+ select_scan_parameters(cinfo);
+ per_scan_setup(cinfo);
+ if (! cinfo->raw_data_in) {
+ (*cinfo->cconvert->start_pass) (cinfo);
+ (*cinfo->downsample->start_pass) (cinfo);
+ (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU);
+ }
+ (*cinfo->fdct->start_pass) (cinfo);
+ (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding);
+ (*cinfo->coef->start_pass) (cinfo,
+ (master->total_passes > 1 ?
+ JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
+ (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);
+ if (cinfo->optimize_coding) {
+ /* No immediate data output; postpone writing frame/scan headers */
+ master->pub.call_pass_startup = FALSE;
+ } else {
+ /* Will write frame/scan headers at first jpeg_write_scanlines call */
+ master->pub.call_pass_startup = TRUE;
+ }
+ break;
+#ifdef ENTROPY_OPT_SUPPORTED
+ case huff_opt_pass:
+ /* Do Huffman optimization for a scan after the first one. */
+ select_scan_parameters(cinfo);
+ per_scan_setup(cinfo);
+ if (cinfo->Ss != 0 || cinfo->Ah == 0) {
+ (*cinfo->entropy->start_pass) (cinfo, TRUE);
+ (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
+ master->pub.call_pass_startup = FALSE;
+ break;
+ }
+ /* Special case: Huffman DC refinement scans need no Huffman table
+ * and therefore we can skip the optimization pass for them.
+ */
+ master->pass_type = output_pass;
+ master->pass_number++;
+ /*FALLTHROUGH*/
+#endif
+ case output_pass:
+ /* Do a data-output pass. */
+ /* We need not repeat per-scan setup if prior optimization pass did it. */
+ if (! cinfo->optimize_coding) {
+ select_scan_parameters(cinfo);
+ per_scan_setup(cinfo);
+ }
+ (*cinfo->entropy->start_pass) (cinfo, FALSE);
+ (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
+ /* We emit frame/scan headers now */
+ if (master->scan_number == 0)
+ (*cinfo->marker->write_frame_header) (cinfo);
+ (*cinfo->marker->write_scan_header) (cinfo);
+ master->pub.call_pass_startup = FALSE;
+ break;
+ default:
+ ERREXIT(cinfo, JERR_NOT_COMPILED);
+ }
+
+ master->pub.is_last_pass = (master->pass_number == master->total_passes-1);
+
+ /* Set up progress monitor's pass info if present */
+ if (cinfo->progress != NULL) {
+ cinfo->progress->completed_passes = master->pass_number;
+ cinfo->progress->total_passes = master->total_passes;
+ }
+}
+
+
+/*
+ * Special start-of-pass hook.
+ * This is called by jpeg_write_scanlines if call_pass_startup is TRUE.
+ * In single-pass processing, we need this hook because we don't want to
+ * write frame/scan headers during jpeg_start_compress; we want to let the
+ * application write COM markers etc. between jpeg_start_compress and the
+ * jpeg_write_scanlines loop.
+ * In multi-pass processing, this routine is not used.
+ */
+
+METHODDEF(void)
+pass_startup (j_compress_ptr cinfo)
+{
+ cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */
+
+ (*cinfo->marker->write_frame_header) (cinfo);
+ (*cinfo->marker->write_scan_header) (cinfo);
+}
+
+
+/*
+ * Finish up at end of pass.
+ */
+
+METHODDEF(void)
+finish_pass_master (j_compress_ptr cinfo)
+{
+ my_master_ptr master = (my_master_ptr) cinfo->master;
+
+ /* The entropy coder always needs an end-of-pass call,
+ * either to analyze statistics or to flush its output buffer.
+ */
+ (*cinfo->entropy->finish_pass) (cinfo);
+
+ /* Update state for next pass */
+ switch (master->pass_type) {
+ case main_pass:
+ /* next pass is either output of scan 0 (after optimization)
+ * or output of scan 1 (if no optimization).
+ */
+ master->pass_type = output_pass;
+ if (! cinfo->optimize_coding)
+ master->scan_number++;
+ break;
+ case huff_opt_pass:
+ /* next pass is always output of current scan */
+ master->pass_type = output_pass;
+ break;
+ case output_pass:
+ /* next pass is either optimization or output of next scan */
+ if (cinfo->optimize_coding)
+ master->pass_type = huff_opt_pass;
+ master->scan_number++;
+ break;
+ }
+
+ master->pass_number++;
+}
+
+
+/*
+ * Initialize master compression control.
+ */
+
+GLOBAL(void)
+jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
+{
+ my_master_ptr master;
+
+ master = (my_master_ptr)
+ (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+ SIZEOF(my_comp_master));
+ cinfo->master = &master->pub;
+ master->pub.prepare_for_pass = prepare_for_pass;
+ master->pub.pass_startup = pass_startup;
+ master->pub.finish_pass = finish_pass_master;
+ master->pub.is_last_pass = FALSE;
+
+ /* Validate parameters, determine derived values */
+ initial_setup(cinfo, transcode_only);
+
+ if (cinfo->scan_info != NULL) {
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+ validate_script(cinfo);
+ if (cinfo->block_size < DCTSIZE)
+ reduce_script(cinfo);
+#else
+ ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+ } else {
+ cinfo->progressive_mode = FALSE;
+ cinfo->num_scans = 1;
+ }
+
+ if (cinfo->optimize_coding)
+ cinfo->arith_code = FALSE; /* disable arithmetic coding */
+ else if (! cinfo->arith_code &&
+ (cinfo->progressive_mode ||
+ (cinfo->block_size > 1 && cinfo->block_size < DCTSIZE)))
+ /* TEMPORARY HACK ??? */
+ /* assume default tables no good for progressive or reduced AC mode */
+ cinfo->optimize_coding = TRUE; /* force Huffman optimization */
+
+ /* Initialize my private state */
+ if (transcode_only) {
+ /* no main pass in transcoding */
+ if (cinfo->optimize_coding)
+ master->pass_type = huff_opt_pass;
+ else
+ master->pass_type = output_pass;
+ } else {
+ /* for normal compression, first pass is always this type: */
+ master->pass_type = main_pass;
+ }
+ master->scan_number = 0;
+ master->pass_number = 0;
+ if (cinfo->optimize_coding)
+ master->total_passes = cinfo->num_scans * 2;
+ else
+ master->total_passes = cinfo->num_scans;
+}
Ecere Software / sdk / blobdiff