Hi.
Uf... It is not working...
jerome wrote:Can you try taking out the 'q' (quiet) in the ear awq command, and then doing make clean/make again?
If you meant that I should open sdk/ear/cmd/ear.epj and change this section:
Code: Select all
452 | //case 'q':
453 | // quiet = true;
454 | // break;
(I have added the comments to them..)..
Now..The command prompt is much longer, here is the output:
Code: Select all
Building ear...
Building self-extract tool...
Ultimate Packer for eXecutables
Copyright (C) 1996 - 2011
UPX 3.08w Markus Oberhumer, Laszlo Molnar & John Reiser Dec 12th 2011
File size Ratio Format Name
-------------------- ------ ----------- -----------
1483374 -> 667246 44.98% win32/pe extract.exe
Packed 1 file.
ECERE Archiver v0.1
Copyright (c) 2003 Jerome Jacovella-St-Louis
General Syntax:
eAR <command> <archive> <parameters>
Extraction Commands:
v (View) <archive> [files...]
x (Extract All) <archive> [where]
e (Extract) <archive> <files...>
Modification Commands:
a (Add) <archive> <files...>
r (Refresh) <archive> <files...>
u (Update) <archive> <files...>
m (Move) <archive> <files...> <to>
n (Rename) <archive> <file> <new name>
d (Delete) <archive> <files...>
c (Clear) <archive>
s (Self Extract) <archive> <self-extractable> (With a: overwrite)
Options:
(aru) f Treat <files> as folders to pack at the root of the archive
(aru) 0 No Compression
(aru) 1 ... 9 (Fastest Compression ... Best Compression (default = 9))
(earu) w Specify an output directory after <files>
(xearu) q Quiet mode
ECERE Archiver v0.1
Copyright (c) 2003 Jerome Jacovella-St-Louis
General Syntax:
eAR <command> <archive> <parameters>
Extraction Commands:
v (View) <archive> [files...]
x (Extract All) <archive> [where]
e (Extract) <archive> <files...>
Modification Commands:
a (Add) <archive> <files...>
r (Refresh) <archive> <files...>
u (Update) <archive> <files...>
m (Move) <archive> <files...> <to>
n (Rename) <archive> <file> <new name>
d (Delete) <archive> <files...>
c (Clear) <archive>
s (Self Extract) <archive> <self-extractable> (With a: overwrite)
Options:
(aru) f Treat <files> as folders to pack at the root of the archive
(aru) 0 No Compression
(aru) 1 ... 9 (Fastest Compression ... Best Compression (default = 9))
(earu) w Specify an output directory after <files>
(xearu) q Quiet mode
ECERE Archiver v0.1
Copyright (c) 2003 Jerome Jacovella-St-Louis
General Syntax:
eAR <command> <archive> <parameters>
Extraction Commands:
v (View) <archive> [files...]
x (Extract All) <archive> [where]
e (Extract) <archive> <files...>
Modification Commands:
a (Add) <archive> <files...>
r (Refresh) <archive> <files...>
u (Update) <archive> <files...>
m (Move) <archive> <files...> <to>
n (Rename) <archive> <file> <new name>
d (Delete) <archive> <files...>
c (Clear) <archive>
s (Self Extract) <archive> <self-extractable> (With a: overwrite)
Options:
(aru) f Treat <files> as folders to pack at the root of the archive
(aru) 0 No Compression
(aru) 1 ... 9 (Fastest Compression ... Best Compression (default = 9))
(earu) w Specify an output directory after <files>
(xearu) q Quiet mode
ECERE Archiver v0.1
Copyright (c) 2003 Jerome Jacovella-St-Louis
General Syntax:
eAR <command> <archive> <parameters>
Extraction Commands:
v (View) <archive> [files...]
x (Extract All) <archive> [where]
e (Extract) <archive> <files...>
Modification Commands:
a (Add) <archive> <files...>
r (Refresh) <archive> <files...>
u (Update) <archive> <files...>
m (Move) <archive> <files...> <to>
n (Rename) <archive> <file> <new name>
d (Delete) <archive> <files...>
c (Clear) <archive>
s (Self Extract) <archive> <self-extractable> (With a: overwrite)
Options:
(aru) f Treat <files> as folders to pack at the root of the archive
(aru) 0 No Compression
(aru) 1 ... 9 (Fastest Compression ... Best Compression (default = 9))
(earu) w Specify an output directory after <files>
(xearu) q Quiet mode
ECERE Archiver v0.1
Copyright (c) 2003 Jerome Jacovella-St-Louis
General Syntax:
eAR <command> <archive> <parameters>
Extraction Commands:
v (View) <archive> [files...]
x (Extract All) <archive> [where]
e (Extract) <archive> <files...>
Modification Commands:
a (Add) <archive> <files...>
r (Refresh) <archive> <files...>
u (Update) <archive> <files...>
m (Move) <archive> <files...> <to>
n (Rename) <archive> <file> <new name>
d (Delete) <archive> <files...>
c (Clear) <archive>
s (Self Extract) <archive> <self-extractable> (With a: overwrite)
Options:
(aru) f Treat <files> as folders to pack at the root of the archive
(aru) 0 No Compression
(aru) 1 ... 9 (Fastest Compression ... Best Compression (default = 9))
(earu) w Specify an output directory after <files>
(xearu) q Quiet mode
ECERE Archiver v0.1
Copyright (c) 2003 Jerome Jacovella-St-Louis
General Syntax:
eAR <command> <archive> <parameters>
Extraction Commands:
v (View) <archive> [files...]
x (Extract All) <archive> [where]
e (Extract) <archive> <files...>
Modification Commands:
a (Add) <archive> <files...>
r (Refresh) <archive> <files...>
u (Update) <archive> <files...>
m (Move) <archive> <files...> <to>
n (Rename) <archive> <file> <new name>
d (Delete) <archive> <files...>
c (Clear) <archive>
s (Self Extract) <archive> <self-extractable> (With a: overwrite)
Options:
(aru) f Treat <files> as folders to pack at the root of the archive
(aru) 0 No Compression
(aru) 1 ... 9 (Fastest Compression ... Best Compression (default = 9))
(earu) w Specify an output directory after <files>
(xearu) q Quiet mode
ECERE Archiver v0.1
Copyright (c) 2003 Jerome Jacovella-St-Louis
General Syntax:
eAR <command> <archive> <parameters>
Extraction Commands:
v (View) <archive> [files...]
x (Extract All) <archive> [where]
e (Extract) <archive> <files...>
Modification Commands:
a (Add) <archive> <files...>
r (Refresh) <archive> <files...>
u (Update) <archive> <files...>
m (Move) <archive> <files...> <to>
n (Rename) <archive> <file> <new name>
d (Delete) <archive> <files...>
c (Clear) <archive>
s (Self Extract) <archive> <self-extractable> (With a: overwrite)
Options:
(aru) f Treat <files> as folders to pack at the root of the archive
(aru) 0 No Compression
(aru) 1 ... 9 (Fastest Compression ... Best Compression (default = 9))
(earu) w Specify an output directory after <files>
(xearu) q Quiet mode
ECERE Archiver v0.1
Copyright (c) 2003 Jerome Jacovella-St-Louis
General Syntax:
eAR <command> <archive> <parameters>
Extraction Commands:
v (View) <archive> [files...]
x (Extract All) <archive> [where]
e (Extract) <archive> <files...>
Modification Commands:
a (Add) <archive> <files...>
r (Refresh) <archive> <files...>
u (Update) <archive> <files...>
m (Move) <archive> <files...> <to>
n (Rename) <archive> <file> <new name>
d (Delete) <archive> <files...>
c (Clear) <archive>
s (Self Extract) <archive> <self-extractable> (With a: overwrite)
Options:
(aru) f Treat <files> as folders to pack at the root of the archive
(aru) 0 No Compression
(aru) 1 ... 9 (Fastest Compression ... Best Compression (default = 9))
(earu) w Specify an output directory after <files>
(xearu) q Quiet mode
Building eAR command line tool...
ECERE Archiver v0.1
Copyright (c) 2003 Jerome Jacovella-St-Louis
General Syntax:
eAR <command> <archive> <parameters>
Extraction Commands:
v (View) <archive> [files...]
x (Extract All) <archive> [where]
e (Extract) <archive> <files...>
Modification Commands:
a (Add) <archive> <files...>
r (Refresh) <archive> <files...>
u (Update) <archive> <files...>
m (Move) <archive> <files...> <to>
n (Rename) <archive> <file> <new name>
d (Delete) <archive> <files...>
c (Clear) <archive>
s (Self Extract) <archive> <self-extractable> (With a: overwrite)
Options:
(aru) f Treat <files> as folders to pack at the root of the archive
(aru) 0 No Compression
(aru) 1 ... 9 (Fastest Compression ... Best Compression (default = 9))
(earu) w Specify an output directory after <files>
(xearu) q Quiet mode
ECERE Archiver v0.1
Copyright (c) 2003 Jerome Jacovella-St-Louis
General Syntax:
eAR <command> <archive> <parameters>
Extraction Commands:
v (View) <archive> [files...]
x (Extract All) <archive> [where]
e (Extract) <archive> <files...>
Modification Commands:
a (Add) <archive> <files...>
r (Refresh) <archive> <files...>
u (Update) <archive> <files...>
m (Move) <archive> <files...> <to>
n (Rename) <archive> <file> <new name>
d (Delete) <archive> <files...>
c (Clear) <archive>
s (Self Extract) <archive> <self-extractable> (With a: overwrite)
Options:
(aru) f Treat <files> as folders to pack at the root of the archive
(aru) 0 No Compression
(aru) 1 ... 9 (Fastest Compression ... Best Compression (default = 9))
(earu) w Specify an output directory after <files>
(xearu) q Quiet mode
ECERE Archiver v0.1
Copyright (c) 2003 Jerome Jacovella-St-Louis
General Syntax:
eAR <command> <archive> <parameters>
Extraction Commands:
v (View) <archive> [files...]
x (Extract All) <archive> [where]
e (Extract) <archive> <files...>
Modification Commands:
a (Add) <archive> <files...>
r (Refresh) <archive> <files...>
u (Update) <archive> <files...>
m (Move) <archive> <files...> <to>
n (Rename) <archive> <file> <new name>
d (Delete) <archive> <files...>
c (Clear) <archive>
s (Self Extract) <archive> <self-extractable> (With a: overwrite)
Options:
(aru) f Treat <files> as folders to pack at the root of the archive
(aru) 0 No Compression
(aru) 1 ... 9 (Fastest Compression ... Best Compression (default = 9))
(earu) w Specify an output directory after <files>
(xearu) q Quiet mode
mingw32-make[2]: *** [obj/release.win32/ear.exe] Error 1
mingw32-make[1]: *** [all] Error 2
mingw32-make: *** [ear] Error 2
Now, I thought that it was something with the ear in the ecere bin folder, so I changed it's name to ear2.exe and then got this..
Code: Select all
E:\Builds\ecere-sdk-f564926>mingw32-make
Bootstrapping eC compiling tools...
Building ecere...
Building ec...
Building ecp...
Building ecc...
Building ecs...
mingw32-make[2]: *** [all] Error 1
mingw32-make[1]: *** [bootstrap] Error 2
mingw32-make: *** [bootstrap] Error 2
First time, I have done mingw32-make clean then make, the second time I did not I will try that as well.
O, and when I go to sdk/ear folder and type ear.exe and the location of the file (I copyed what you wrote and then entered the exact location as well...it is not working, it was only showing the ear.exe "usage manual".
Also, regarding calling the part that makes error without q parameter, if that is what you were actually thinking off gives this:
Code: Select all
E:\Builds\ecere-sdk-f564926\ear>ear [b]aw[/b] obj/release.win32/ear.exe locale/es
_ES/LC_MESSAGES/ear.mo "locale/es_ES/LC_MESSAGES"
Failed to open archive obj/release.win32/ear.exe for writing!
I hope that I have not put a lot of words without any sense as my head is a bit hurting from the sun.. :/
Yes, and I do have
Code: Select all
sdk\ear\cmd\locale\es_ES\LC_MESSAGES/ear.mo
sdk\ear\cmd\locale\es_ES\LC_MESSAGES/ear.po
as well as
Code: Select all
sdk\ear\cmd\locale\zh_CN\LC_MESSAGES/ear.mo
sdk\ear\cmd\locale\zh_CN\LC_MESSAGES/ear.po
and
Almost forgot, unless Ecere needs 1GB space, I have enough on this partition.. If will transfer the false somewhere else and try again (but the previous ecere built with 400MB available only so I do not think that that is the issue), the main partition has about 10GB free.
Sorry for all the hassle..
A question:
I was searching the forums and found Sam's post about not being able to build at one point, so I added the gettext and other dependencies (libiconv-2.dll and libintl-8.dll in the ecere/bin folder) and gettext in mingw/bin folder..that is OK right? And could that be an issue?
Best Regards,
D.Bane
No army is to big, if the heart is beating strong.
There's no bad luck, it's just easier to blame someone else.